Oudshoorn Technische handelsonderneming
P.O.Box 183, 3440 AD Woerden, NL
Jaap Bijzerweg 18, 3446 CR Woerden, NL
Tel. +31 348-422000 Fax +31 348-423791
E-mail: info@oudshoorn-hydraulics.nl
Open: ma-vr, 8:00-12:30, 13:00-17:00
Copyright © oudshoorn-hydraulics.nl 2002-2010
Series: A-..
These articles are made of two rings moulded into vulcanized rubber. Interposed between the bellhousing and the tank cover, they diminuish the noise created by the power transmission by approx. 3-5 dB. The employed rubber is mineral oil resistant, max. working temperature is 80°C.
Series: CP..GC
Made of die-cast aluminium. Supplied complete of CCP**, cover in steel plate, GSP** gasket in "guarnital". Nominal capacity of 3 and 6 dm2, corresponds to 3/4 of the total capacity. Supplied with drain plug. Steelplate cover with oil and rustproof coating.
Series: CFP..GC
Made in steel plate, they are supplied with covers and drain plug. Cover made in steel plate, oil and rust proof painted.
Factory documentation: CFP..GC
In line SPIN-ON type filters with disposable cartridge elements suitable for application on suction lines or pressure return lines. Filter heads are available with port tappings of 3/4" to 1, 1/2" BSP, whilst the larger size types are available with SAE ports.
SPIN-ON replace elements can be supplied either standard or with safety feature to stop oil spillage during element replacement.
Factory documentation: Spin-on filters
Series: HPM
HPM is the high pressure filter up to 42.000.000 Pa (420 bar-6000 Psi); the range is composed by 3 different sizes with nominal flow rates up to 400 l/min., available with threaded or flanged connections.
Filter elements are made with the most advanced materials, as a guarantee for an high filtration efficiency and a long-lasting life. HPM series modular construction allows the customer to choose the most suitable type following his needs.
Series: OMTF
OMTF is the series of return lines; the range includes four
different sizes with nominal flow rates up to 400L/min.
Filter elements are made with the most advanced materials, as a
guarantee for a high filtration efficiency and a long-lasting life.
The modular construction design, peculiar to OMTF series,
allows OMT customers to choose the most suitable type
meeting their needs.
Series: TSA
Air filters are mounted on oiltanks with the aim to filter the air. They are also mounted in suction of compressors and engines. Available with BSP threads. Replace elements are regenerated in velvet net in 40 micron.
Series: SF..-G
Suction elemts for fully immersed, tank mounting. Elements are constructed of cleanable metal mesh. Mesh is glued to the end caps. With BSP Thread.
Factory documentation : SF..-G
Bellhousings are the mechanical elements used to connect an
electric motor equipped with standard flange to a hydraulic
pump, thus forming the pump/motor unit.
The bellhousings of this range allow to establish a perfect assembly between electrical motors with standard flange up to 270 kW and the majority of the hydraulic pumps available on the world market.
They are produced in alluminium alloy and, depending on the application, are made of a single piece, or made of several components: a base bellhousing, flange, distance ring.
Factory documentation: Bellhousings
Series: ND ...
These couplings with flexible element, are used to establish a connection between an
electrical motor with standard flange and a pump
The bellhousings of this range allow to establish a perfect
assembly between electrical motors with standard flange up to
315 kW and the majority of the hydraulic pumps available on the
world market.
Series: LG..
LG series visual level gauges with or without thermometer, are made in steel and supplied with a Buna-N oil seal. They are fitted to the exterior of oil and fuel tanks.
A bulb thermometer incorporated in the level gauge (Version "T") permits to check the temperature of the fluic in the oil tank.
Series: LM3F-...
They give an electric signal when min. and/or max. oil levels is reached inside the oil tank. They must be mounted vertically, fixed on the tank cover and at least 50 mm away from oil tank walls. They are available with two type of fixation:
Factory documentation : LM3F-...
Series: MAR../MAF..
These are glycerine filled pressure gauges and can be supplied in two different nominal sizes:
Material: stainless steel case (AISI 300), brass body, glyserine filled 98%, vedril type glass.
Temperature range: -10°C tot 80°C.
Factory documentation: MAR../MAF..
Series: OMTI-..
Dry pressure gauges and vacuum pressure gauges. ABS body, plexiglass cover.
Factory documentation : OMTI-..
Series: RBA../RDA..
Weldable steel elbow joints, suitable to be mounted on pumps an dmotores with ports as per DIN 2353 standard. They are supplied complete with O-Ring, fastening bolts and washers.
Fabrieksdocumentatie RBA../RDA..
Series: UP.-..
Joints of "UP" series conform with SAE dimensions and they are suitable for pressure's connections. They are available for two pressure ranges and in various configurations. They are supplied with fastening bolts, washers and O-ring.
Series: TR-./TRS
Chrome plated bayonet oil fillers with air breather caps. They serve two purposes which are important on hydraulic installations:
The TR-. are fully equipped with gaskets, fixing screws and steel basket or thermoplastic material for TR-2.
The TRS are mounted directly on the cover by welding of the base. They are fully equipped with anti-oil rubber gaskets and extractible basket only in steel.