Pricing
Category
Brand
Search code
ALM2BK1R30S3E
Specifications
Flange
BK1 with fitting edge dia. 80 mm
Axle type
conical 1:5 with key
Connection
DIN port
Turning direction
both
Displacement
21.1 cm3/rev
Flow at 1500 Rpm
30.1 l/min
Extra
Build type | gear motor |
Max. torq shaft | 70±4 Nm |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 180 bar |
Max. pressure intermittent | 170 bar |
Max. peak pressure | 195 bar |
Max. revs | 3400 rpm |
Min. revs | 500 rpm |
Volume efficiency | 95% between 1000 - 2000rpm |
Shaft length | 16 mm |
Shaft length inc. fitting edge | 23.2 mm |
Height fitting edge | 7.2 mm |
Dia. fitting edge | 80 mm |
Center inlet - front | 47.5 mm |
Front - back excl. fitting edge | 119.5 mm |
Thread mounting bolt sunction side | M8 |
Size bolts sunction side | 40 mm |
Thread bolt press side | M8 |
Size bolts press side | 40 mm |
Dia. mounting hole front | 9 mm |
Size mounting holes front | 72x100 mm |
Dia. drain connection | 1/4" BSP |
key width | 3 mm |
Material front and back | aluminium |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
bearings | yes |
Sound level | middle |
Shaft load 1 (Max. torq) | 140 Nm |
Flange | BK1 with fitting edge dia. 80 mm |
Shaft type | conical 1:5 with key |
Connection | DIN port |
Turning direction | both |
Displacement | 21.1 cm3/rev |
Flow at 1500 Rpm | 30.1 l/min |