Pricing
SKU
P1.50410
Stock
4
Your price
€ 328,30
Category
Brand
Search code
ALM2R40E1
Specifications
Flange
European 4-hole mounting
Axle type
conical dia. 14,7mm
Connection
standard European port
Turning direction
both
Displacement
28.2 cm3/rev
Flow at 1500 Rpm
40.1 l/min
Extra
Build type | gear motor |
Max. torq shaft | 70±4 Nm |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 170 bar |
Max. pressure intermittent | 160 bar |
Max. peak pressure | 185 bar |
Max. revs | 2500 rpm |
Min. revs | 500 rpm |
Volume efficiency | 95% between 1000 - 2000rpm |
Shaft thread | M12x1,5 |
Shaft length | 35 mm |
Shaft length inc. fitting edge | 40 mm |
Height fitting edge | 5 mm |
Dia. fitting edge | 36.5 mm |
Center inlet - front | 64 mm |
Front - back excl. fitting edge | 130.5 mm |
Thread mounting bolt sunction side | M8 |
Size bolts sunction side | 40 mm |
Thread bolt press side | M8 |
Size bolts press side | 40 mm |
Dia. mounting hole front | 8.5 mm |
Size mounting holes front | 71,5x96 mm |
Dia. drain connection | 1/4" BSP |
key width | 4 mm |
Material front and back | aluminium |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
bearings | yes |
Sound level | middle |
Shaft load 1 (Max. torq) | 200 Nm |
Flange | European 4-hole mounting |
Shaft type | conical dia. 14,7mm |
Connection | standard European port |
Turning direction | both |
Displacement | 28.2 cm3/rev |
Flow at 1500 Rpm | 40.1 l/min |