Nederlands
English
Deutsch
Pricing
Shown price does not include VAT
Category
Brand
Search code
GHM1AR6S1E1
Specifications
Flange
SAE AA version 2-hole
Axle type
spline-shaft SAE 9T 20/40-30
Connection
standard European port
Turning direction
both
Displacement
4.1 cm3/rev
Flow at 1500 Rpm
5.9 l/min
Extra
| Build type | gear motor |
| Medium | hydraulic oil |
| Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
| Temperature range | -10⁰C +80⁰C |
| Pressure continuous | 270 bar |
| Max. pressure intermittent | 260 bar |
| Max. peak pressure | 290 bar |
| Max. revs | 4000 rpm |
| Min. revs | 700 rpm |
| Volume efficiency | 95% between 1000 - 2000rpm |
| Shaft diameter | 12.7 mm |
| Shaft length | 20.6 mm |
| Shaft length inc. fitting edge | 27 mm |
| Height fitting edge | 6.4 mm |
| Dia. fitting edge | 50.8 mm |
| Center inlet - front | 46 mm |
| Front - back excl. fitting edge | 89 mm |
| Thread connection sunction side | 3/4-16 UNF |
| Thread connection press side | 3/4-16 UNF |
| Dia. mounting hole front | 10.3 mm |
| Size mounting holes front | 82.55 mm |
| Dia. drain connection | 1/4" BSP |
| Material front and back | cast iron |
| Material housing | aluminium |
| Material seal | NBR |
| Material gears | special hardened steel |
| bearings | yes |
| Sound level | middle |
| Shaft load 1 (Max. torq) | 100 Nm |
| Flange | SAE AA version 2-hole |
| Shaft type | spline-shaft SAE 9T 20/40-30 |
| Connection | standard European port |
| Turning direction | both |
| Displacement | 4.1 cm3/rev |
| Flow at 1500 Rpm | 5.9 l/min |