Pricing
Category
Brand
Search code
GHM2AR13E1
Specifications
Flange
SAE A version 2-hole
Axle type
cylindrical SAE dia. 15,88mm with key
Connection
SAE J-1926 UNF
Turning direction
both
Displacement
9.6 cm3/rev
Flow at 1500 Rpm
13.7 l/min
Extra
Build type | gear motor |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2016 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 270 bar |
Max. pressure intermittent | 280 bar |
Max. peak pressure | 295 bar |
Max. revs | 4000 rpm |
Min. revs | 700 rpm |
Volume efficiency | 95% between 1000 - 2000rpm |
Shaft diameter | 15.88 mm |
Shaft length | 24 mm |
Shaft length inc. fitting edge | 32 mm |
Height fitting edge | 6.4 mm |
Dia. fitting edge | 82.55 mm |
Center inlet - front | 49.5 mm |
Front - back excl. fitting edge | 100 mm |
Thread connection sunction side | 1 1/16-12 UNF |
Thread connection press side | 7/8-14 UNF |
Dia. mounting hole front | 11.1 mm |
Size mounting holes front | 106.4 mm |
Dia. drain connection | 1/4" BSP |
key width | 3.97 mm |
Material front and back | cast iron |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
Sound level | middle |
Shaft load 1 (Max. torq) | 140 Nm |
Flange | SAE A version 2-hole |
Shaft type | cylindrical SAE dia. 15,88mm with key |
Connection | SAE J-1926 UNF |
Turning direction | both |
Displacement | 9.6 cm3/rev |
Flow at 1500 Rpm | 13.7 l/min |