Pricing
Category
Brand
Search code
GHM2AR13S1FGE
Specifications
Flange
SAE A version 2-hole
Axle type
spline-shaft SAE 9T 16/32-30
Connection
BSPP ports (GAS)
Turning direction
both
Displacement
9.6 cm3/rev
Flow at 1500 Rpm
13.7 l/min
Extra
Build type | gear motor |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 280 bar |
Max. pressure intermittent | 270 bar |
Max. peak pressure | 295 bar |
Max. revs | 4000 rpm |
Min. revs | 700 rpm |
Volume efficiency | 95% between 1000 - 2000rpm |
Shaft diameter | 15.88 mm |
Shaft length | 25.6 mm |
Shaft length inc. fitting edge | 32 mm |
Height fitting edge | 6.4 mm |
Dia. fitting edge | 82.55 mm |
Center inlet - front | 49.5 mm |
Front - back excl. fitting edge | 100 mm |
Thread connection sunction side | G1/2 |
Thread connection press side | G1/2 |
Dia. mounting hole front | 11.1 mm |
Size mounting holes front | 106.4 mm |
Material front and back | cast iron |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
bearings | yes |
Sound level | middle |
Shaft load 1 (Max. torq) | 185 Nm |
Flange | SAE A version 2-hole |
Shaft type | spline-shaft SAE 9T 16/32-30 |
Connection | BSPP ports (GAS) |
Turning direction | both |
Displacement | 9.6 cm3/rev |
Flow at 1500 Rpm | 13.7 l/min |