Nederlands
English
Deutsch
Pricing
Shown price does not include VAT
Category
Brand
Search code
GHM2AR30C2EE1
Specifications
Flange
SAE A version 2-hole
Axle type
cylindrical dia. 19mm with key
Connection
standard European port
Turning direction
both
Displacement
21.1 cm3/rev
Flow at 1500 Rpm
30.1 l/min
Extra
| Build type | gear motor |
| Medium | hydraulic oil |
| Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
| Temperature range | -10⁰C +80⁰C |
| Pressure continuous | 230 bar |
| Max. pressure intermittent | 220 bar |
| Max. peak pressure | 245 bar |
| Max. revs | 2200 rpm |
| Min. revs | 500 rpm |
| Volume efficiency | 95% between 1000 - 2000rpm |
| Shaft diameter | 19 mm |
| Shaft length | 25.6 mm |
| Shaft length inc. fitting edge | 32 mm |
| Height fitting edge | 6.4 mm |
| Dia. fitting edge | 82.55 mm |
| Center inlet - front | 58.5 mm |
| Front - back excl. fitting edge | 118 mm |
| Thread mounting bolt sunction side | M8 |
| Size bolts sunction side | 40 mm |
| Thread bolt press side | M8 |
| Size bolts press side | 40 mm |
| Dia. mounting hole front | 11.1 mm |
| Size mounting holes front | 106.4 mm |
| Dia. drain connection | 1/4" BSP |
| key width | 4.78 mm |
| Material front and back | cast iron |
| Material housing | aluminium |
| Material seal | NBR |
| Material gears | special hardened steel |
| bearings | yes |
| Sound level | middle |
| Shaft load 1 (Max. torq) | 160 Nm |
| Flange | SAE A version 2-hole |
| Shaft type | cylindrical dia. 19mm with key |
| Connection | standard European port |
| Turning direction | both |
| Displacement | 21.1 cm3/rev |
| Flow at 1500 Rpm | 30.1 l/min |