Pricing
Category
Brand
Search code
GHM3BK1R50EE1
Specifications
Flange
BK1 with fitting edge dia. 105 mm
Axle type
conical 1:5 with key
Connection
standard European port
Turning direction
both
Displacement
33 cm3/rev
Flow at 1500 Rpm
48 l/min
Extra
Build type | gear motor |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 270 bar |
Max. pressure intermittent | 260 bar |
Max. peak pressure | 285 bar |
Max. revs | 3000 rpm |
Min. revs | 500 rpm |
Volume efficiency | 95% between 1000 - 2000rpm |
Shaft thread | M16x1,5 |
Shaft length | 43 mm |
Shaft length inc. fitting edge | 51 mm |
Height fitting edge | 8 mm |
Dia. fitting edge | 105 mm |
Center inlet - front | 68.5 mm |
Front - back excl. fitting edge | 136 mm |
Thread mounting bolt sunction side | M10 |
Size bolts sunction side | 56 mm |
Thread bolt press side | M10 |
Size bolts press side | 56 mm |
Dia. mounting hole front | 11 mm |
Size mounting holes front | 102x145 mm |
Dia. drain connection | G3/8 |
key width | 5 mm |
Material front and back | cast iron |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
bearings | yes |
Sound level | middle |
Shaft load 1 (Max. torq) | 300 Nm |
Flange | BK1 with fitting edge dia. 105 mm |
Shaft type | conical 1:5 with key |
Connection | standard European port |
Turning direction | both |
Displacement | 33 cm3/rev |
Flow at 1500 Rpm | 48 l/min |