Pricing
Category
Brand
Search code
GHM2BK1R12T5T
Specifications
Flange
BK1 with fitting edge dia. 80 mm
Axle type
conical 1:5 with key
Connection
DIN port
Turning direction
both
Displacement
8.3 cm3/rev
Flow at 1500 Rpm
11.8 l/min
Extra
Build type | gear motor |
Max. torq shaft | 70±4 Nm |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 280 bar |
Max. pressure intermittent | 270 bar |
Max. peak pressure | 295 bar |
Max. revs | 4000 rpm |
Min. revs | 700 rpm |
Center inlet - front | 48.3 mm |
Front - back excl. fitting edge | 98 mm |
Thread mounting bolt sunction side | M6 |
Size bolts sunction side | 40 mm |
Thread bolt press side | M6 |
Size bolts press side | 40 mm |
key width | 4 mm |
Material front and back | cast iron |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
bearings | yes |
Sound level | middle |
Shaft load 1 (Max. torq) | 180 Nm |
Flange | BK1 with fitting edge dia. 80 mm |
Shaft type | conical 1:5 with key |
Connection | DIN port |
Turning direction | both |
Displacement | 8.3 cm3/rev |
Flow at 1500 Rpm | 11.8 l/min |